Railway signal cables from 2 to 28 pairs. Annealed copper conductors of 1, 1.5 mm2 or 2.5 mm2 section, insulated in solid PE. Stranded in pairs or quads Shielded with corrugated copper tape and armoured with two steel tapes applied helically. PVC unleaded outer sheath. This cable is flame retardant and resistant to mineral oils.  Generally according to SNCF CT-445 and EN 60332-1.

Cables of 1 to 20 pairs individually shielded with an aluminium/polyester laminate. Conductors of 0.9 and 1.4 mm nominal diameter, PE insulation. Pairs are stranded in layers to form the core that is protected with an anti-inductive polyethylene sheath with a reduction factor of 0.1. Cable protected against rodents.

Cables from 4 to 61 conductors of 1.4 mm nominal diameter, with solid polyethylene insulation. The conductors are stranded in layers to form the core which is then protected by a double LSZH sheath. Appropriate for external installation and in tunnels where fire resistant characteristics and protection against rodents are required.

Cables from 1 to 25 quads of 0.9 or 1.4 mm, polyethylene insulated. Quads are stranded in layers to form the core which is then protected by an anti inductive sheath with reduction factor 0,3.

Cables from 1 to 120 conductors of 0.9, 1.4 and 1.8 mm, polyethylene insulated. Conductors are stranded in layers to form the core which is then protected by a (L)2YB2Y anti rodent sheath.

Cables from 1 to 40 quads of 0.9 or 1.4 mm, polyethylene insulated. Quads are stranded in layers to form the core which is then protected by a (L)2YB2Y anti rodent sheath. For installation in ducts or directly buried. Generally according to DB AG 416.0116 and DB AG 416.0115